Attwood warrants to the first retail purchaser of its products that Attwood will replace or repair the product, at its sole discretion, if any defects in material or workmanship are reported within the applicable warranty periods set out below from the date of the first retail purchase, subject to the remedies, exclusions, and limitations in this Limited Warranty. This limited warranty is effective for all Attwood products purchased after May 1, 2009.
Boat Covers and Tops: Attwood will apply the below percentages of the original purchase price of the boat cover as a discount off of the cost of a replacement boat cover for each of the prorated warranty periods set out below.
- Silver Coat, Road Ready™, Snug Harbor Silver Series and Custom Boat Covers: 3 years Prorated
- 1st Full Year 100%
- 2nd Full Year 67%
- 3rd Full Year 33%
- Road Max™ Boat Covers: 4 years Prorated
- 1st Full Year 100%
- 2nd Full Year 75%
- 3rd Full Year 50%
- 4th Full Year 25%
- Snug Harbor Titanium Series, Road Max™ 600 Boat Covers and Acrylic and Vinyl Bimini Tops: 5 years Prorated
- 1st Full Year 100%
- 2nd Full Year 80%
- 3rd Full Year 60%
- 4th Full Year 40%
- 5th Full Year 20%
- Boaters Best™ Boat Covers: 6 years Prorated
- 1st Full Year 100%
- 2nd Full Year 83%
- 3rd Full Year 66%
- 4th Full Year 49%
- 5th Full Year 32%
- 6th Full Year 15%
- Boaters Best™ Ultimate Boat Covers: 8 years Prorated
- 1st Full Year 100%
- 2nd Full Year 88%
- 3rd Full Year 75%
- 4th Full Year 63%
- 5th Full Year 50%
- 6th Full Year 37%
- 7th Full Year 25%
- 8th Full Year 12%
Pumps:
- Heavy Duty Bilge Pumps Installed on Recreational/Pleasure Boats (Part Numbers 4030, 4040, 4060, 4070): 3 years
- Heavy Duty Bilge Pumps Installed on Commercial Boats (commercial use is defined as any work or employment related use of the product even if only occasionally used for such purposes) (Part Number 4030, 4040, 4060, 4070): 1 year
- Sahara Series Automatic Bilge Pumps (Part Numbers 4505, 4507, 4508, 4511): 3 years
- Tsunami Series Cartridge Bilge and Aerator Pumps (Part Numbers 4606, 4608, 4609, 4612, 4613, 4620, 4622, 4623, 4624, 4625, 4640, 4650, 4651, 4660, 4661, 4670, 4672): 3 years
- Automatic Float Switch (Part Numbers 4201, 4202): 3 years
- Digital Bilge Switch (Part Numbers 4801, 4802): 3 years
Bilge Blowers:
- Water-Resistant Turbo Bilge Blowers (Part Numbers 1733, 1743, 1745, 1749 and 1751): 3 years
- Standard (Non Water-Resistant) Turbo Bilge Blowers (Part Numbers 1731, 1741 and 1747) except when used in applications which allow contact with liquids (Exception No. 2): 1 year
LED lights: 10 years
Pro-Series I and II Rod Holders (Part Numbers 5002, 5003, 5004, and 5010): 5 years
Pro-Series Bi-Axis Rod Holder Mounts (Part Numbers 5011 and 5012): 3 years
Attwood Rod Holders (Part Numbers 5009 and 5009W): 3 years
Attwood Fuel Products: 2 years
Marine Carbon Canister (Part Numbers 99510, 99515, 99520, 99530, and 99540): 5 years
ZAMAK Hardware, or Perma-Plate Parts: 2 years
Attwood Cast Stainless Steel Hardware: Life of the Boat
All other Attwood and Swivl-Eze Brand Products: 1 year
Other Limitations: EXCEPT AS SET FORTH HEREIN, THERE ARE NO OTHER WARRANTIES EITHER EXPRESS OR IMPLIED PROVIDED BY ATTWOOD ON THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE EXPRESSLY EXCLUDED. ATTWOOD FURTHER DISCLAIMS ANY LIABILITY FOR ECONOMIC LOSS ARISING FROM CLAIMS OF PRODUCT FAILURE, NEGLIGENCE, DEFECTIVE DESIGN, MANUFACTURING DEFECT, FAILURE TO WARN AND/OR INSTRUCT, LACK OF SEAWORTHINESS, AND ANY OTHER THEORY OF LIABILITY NOT EXPRESSLY COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY. TO THE EXTENT REQUIRED BY LAW ANY IMPLIED WARRANTY IS LIMITED TO THE DURATION OF THE RESPECTIVE EXPRESS LIMITED WARRANTIES STATED HEREIN. TO THE EXTENT ALLOWED BY LAW NEITHER ATTWOOD, NOR THE SELLING DISTRIBUTOR SHALL HAVE ANY RESPONSIBILITY FOR LOSS OF USE OF THE PRODUCT OR THE BOAT, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR INCIDENTAL AND CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT BE APPLICABLE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT BE APPLICABLE. THIS WARRANTY GIVES THE OWNER SPECIFIC LEGAL RIGHTS, AND THE OWNER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. RETAIL CUSTOMERS IN THE EUROPEAN ECONOMIC AREA (EEA) MAY HAVE LEGAL RIGHTS UNDER APPLICABLE NATIONAL LEGISLATION REGARDING THE SALE OF RETAIL GOODS WHICH ARE NOT AFFECTED BY THIS LIMITED WARRANTY. THE RETAIL CUSTOMER’S LEGAL RIGHTS UNDER ANY APPLICABLE NATIONAL LEGISLATION REGARDING THE SALE OF RETAIL GOODS SHALL NOT BE AFFECTED.
Sole Remedy: In no event shall any repair or replacement under this Limited Warranty exceed the fair market value of the product as of the date of the owner’s claim. THE REMEDY OF REPAIR OR REPLACEMENT OF PARTS OR MATERIALS FOUND TO BE DEFECTIVE IN FACTORY MATERIALS OR WORKMANSHIP COVERED BY THIS LIMITED WARRANTY SHALL CONSTITUTE THE OWNER’S SOLE AND EXCLUSIVE REMEDY AGAINST ATTWOOD FOR ANY CLAIMS WHATSOEVER OF ECONOMIC LOSS RESULTING FROM PRODUCT FAILURE.
Acceptance of any product returned or any refund provided by Attwood shall not be deemed an admission that the product is defective. Products that are replaced become Attwood’s property. The terms and conditions contained in this limited warranty may not be modified, altered or waived by any action, inaction, or representations, whether oral or in writing, except upon the express, written authority of a management level employee of Attwood.
This Limited Warranty does not apply to the following items:
- Any Attwood products used in other applications than on pleasure boats, including but not limited to non-marine use or use on boats which are utilized for racing or commercial purposes, with the exception of the Heavy Duty Bilge Pumps installed on commercial boats (Part Numbers 4030, 4040, 4060, 4070).
- Any non water-resistant Turbo Bilge Blowers (Part Numbers 1731, and 1741) used in applications which allow direct contact with water or other liquids.
- Due to wind velocity encountered when boats are trailered, only Snug Harbor™ Silver Series, Snug Harbor™ Titanium Series, Silver Coat, Road Ready™, Road Max™, Road Max™ 600, Boaters Best™, Boaters Best™ Ultimate, and Custom boat covers, when properly tied down, are warranted as suitable for use in connection with towing on a trailer. No warranty is extended on any other boat covers when used in connection with a trailered boat.
- Damage to the boat cover or to any other property or any injury resulting from the failure to properly tie down a boat cover before towing is not covered.
- Ancillary equipment used or associated with Attwood products, including but not limited to, batteries, fuses, electric light bulbs, lamps, or sealed beam units.
- Any product damaged by accident, acts of nature, improper installation, unreasonable or improper use, lack of proper maintenance, unauthorized repairs or modifications, abuse, normal wear or tear, or other causes not arising from defects in materials or workmanship.
- Any expenses involved in the removal, reinstallation, or transportation of the product.
- Any product damaged by the failure of the owner to use, maintain, or store the product as specified in any instructions.
- Any boat cover torn or ripped because of forcing the fabric over sharp edges or corners, failing to protect the fabric from sharp objects, or allowing water, snow or ice to pool or puddle on the product.
- Any boat cover fabric discoloration, or failure due to chemical exposure such as bird droppings, tree sap, gas, and oil or mildew due to water, snow or ice, dirt, leaves, pine needles resting on the product or the product stored while damp.
- Any defect or repair requiring redesign of the Attwood product, except pursuant to the recall provisions of the United States Federal Boat Safety Act of 1971 or the recall laws of any other foreign jurisdiction.
As an expert in marine products and warranties, I bring a wealth of knowledge and experience to the discussion. I have a deep understanding of the industry, having closely followed the developments and innovations in marine equipment and accessories. My expertise extends to warranty policies, ensuring that consumers are well-informed about their rights and limitations when purchasing marine products.
Now, let's dive into the key concepts and information outlined in the provided article:
1. Limited Warranty Overview:
- Attwood provides a limited warranty to the first retail purchaser of its products.
- The warranty covers the replacement or repair of products with defects in material or workmanship.
- The warranty periods vary for different product categories.
2. Effective Date:
- The limited warranty is effective for all Attwood products purchased after May 1, 2009.
3. Boat Covers and Tops Warranty:
- Different boat cover series have varying prorated warranty periods.
- Warranty percentages decrease over the years, providing a discount for replacement boat covers.
4. Pumps Warranty:
- Various pump types have different warranty periods, ranging from 1 to 3 years.
- Commercial boat installations have a shorter warranty period compared to recreational boats.
5. Bilge Blowers Warranty:
- Water-resistant turbo bilge blowers have a 3-year warranty, while standard (non-water-resistant) blowers have a 1-year warranty.
- Exceptions exist for non-water-resistant blowers used in specific applications.
6. LED Lights Warranty:
- LED lights are covered by a 10-year warranty.
7. Rod Holders and Mounts Warranty:
- Different rod holder and mount types have varying warranty periods.
8. Fuel Products and Hardware Warranty:
- Attwood fuel products have a 2-year warranty.
- ZAMAK hardware and Perma-Plate parts have a 2-year warranty.
- Cast stainless steel hardware has a lifetime warranty.
9. Other Attwood and Swivl-Eze Brand Products Warranty:
- Most other Attwood and Swivl-Eze brand products have a 1-year warranty.
10. Other Limitations:
- Attwood disclaims all warranties except those explicitly stated in the limited warranty.
- Limitations on economic loss, implied warranties, and liability are outlined.
11. Sole Remedy:
- The repair or replacement of defective parts is the sole remedy for product claims.
- The remedy's value cannot exceed the fair market value of the product.
12. Return and Refund Policy:
- Acceptance of a returned product or providing a refund does not admit product defects.
- Replaced products become Attwood's property.
13. Limitations and Exclusions:
- The limited warranty excludes certain items, such as non-marine use, racing or commercial boat use, and specific damages or conditions.
14. Towing Warranty for Boat Covers:
- Specific boat covers are warranted for use in connection with towing on a trailer.
15. Exclusions from Warranty Coverage:
- Various circ*mstances and conditions are explicitly excluded from warranty coverage, including improper use, lack of maintenance, and environmental factors.
In conclusion, Attwood's warranty policy is comprehensive, covering a range of marine products with varying terms and conditions. It is crucial for consumers to understand these terms to ensure proper usage, maintenance, and adherence to warranty conditions.
